Explore Our Resources
Two practical guides to get you started — from the full printing workflow to how we test every machine before it ships.
Production Process
Follow the complete sock-printing workflow: from design and RIP processing, through printing and oven curing, to packing and delivery. Includes production process charts for four ink & material combinations.
- 5-step printing workflow (Design → RIP → Print → Cure → Pack)
- Production processes for sublimation, reactive, pigment & acid inks
- Jacquard vs. sublimation vs. digital printing comparison
Equipment Testing
See how Ningbo Colorido rigorously tests and inspects every machine before shipment — from component warehousing and frame assembly to printhead debugging and final on-site demonstration.
- Control box wiring & internal wiring inspection
- Printhead assembly & fine debugging
- Spare accessory inventory & team demonstration
Daily Care & Maintenance Schedule
A quick-reference routine to extend the lifespan of your print head and keep print quality consistent. Full troubleshooting is available in our FAQs.
Every Day
- Cap the print head properly after each work session
- Wipe the print head, surrounding ink and operating platform bottom with a dust-free wet wipe (not wet paper towels)
- Check ink levels before starting a print run
Every 2 Weeks
- Apply solid lubricant to the linear slide
- Inspect the drag chain / cable carrier for wear
- Check the capping station seal for ink buildup
Every Month
- Apply solid lubricant to the belt gear
- Check belt tension and adjust if needed
- Clean the encoder strip with a soft cloth
Every 3 Months
- Replace the ink pad to prevent rubber aging and air entering the nozzle
- Apply solid grease to the turntable shafts to prevent rust
- Inspect all pneumatic fittings and tubing for leaks
Every 6 Months
- Change the oven gearbox oil (ISO VG 220 standard; ISO VG 68 in summer, ISO VG 32 in winter)
- Deep-clean the print head with cleaning fluid if long-term storage is planned
- Full electrical connection check on the control box
Extended Storage
- Soak the print head: pour cleaning fluid on the ink pad, cap the head, and let it sit for ~1 day
- Drain ink from the main cartridge if storing for more than 30 days
- Store in a dry, temperature-controlled room (15–30 °C)
Print head lifespan is typically 8 months to 1 year, but with proper daily care some customers use the same head for over 2 years. Need help with a specific issue? Browse our FAQs or contact support.
Still Have Questions?
Our technical team usually responds within 30 minutes via WhatsApp or email — free online support for every Ningbo Colorido customer.