CO70-220PRO Single-Roller Multifunction Printer

    Single-arm open structure 70–220 mm rollers 20–30 pairs/hour 720×600 DPI
    CO70-220PRO single-roller multifunction printer front view
    CO70-220PRO single-roller multifunction printer side view
    CO70-220PRO single-arm printer with open cantilever structure
    CO70-220PRO printer with dual Epson I1600 print heads
    CO70-220PRO aluminum alloy roller close-up
    CO70-220PRO lead screw lifting mechanism close-up
    CO70-220PRO front view
    CO70-220PRO side view
    Open cantilever single-arm structure
    Dual Epson I1600 print heads
    Aluminum alloy roller
    Lead screw lifting mechanism
    Quick answer

    What Makes the CO70-220PRO Our Entry-Level Multifunction Printer?

    The CO70-220PRO is a single-arm, single-roller multifunction digital sock printer with spiral printing technology. Roller diameters range from 70 to 220 mm, delivering full-color prints on polyester, cotton, wool and nylon tubular products — socks, neck gaiters, ice sleeves and wristbands — at 20–30 pairs per hour.

    • Open single-arm structure

      The cantilever single-roller design offers generous space for loading and sleeving, making style changeovers and setup quick and easy.

    • 20–30 pairs per hour

      Up to about 30 pairs per hour with low investment cost — the ideal entry point for startups and sock shops entering the custom-printing business.

    • Sharp 720×600 DPI output

      Dual Epson I1600 print heads with Neostampa RIP reproduce fine patterns and vivid colors on every tubular product.

    • 70–220 mm roller range

      Swap to the appropriate cylinder size and the same platform prints everything from slim socks to neck gaiters and ice sleeves.

    Request a Quote Download PDF Catalog
    Precise printing

    Entry-Level CO70-220PRO Multifunction Printer

    The CO70-220PRO is Ningbo Colorido's entry-level single-roller sock printer. Its rotating single-roller design keeps the investment cost low, making it an ideal choice for startups and sock shops entering the custom-printing business. Printing efficiency reaches up to approximately 30 pairs per hour, and by simply swapping to the appropriate cylinder size, the same platform can also customize neck gaiters, headwear, ice sleeves, underwear, yoga leggings and other compatible tubular knit products.

    The sock printer is equipped with 2 Epson I1600 print heads and the latest version of Neostampa RIP software, connected through a stable Ethernet port. It supports polyester, cotton, wool and nylon with disperse, acid and reactive ink routes, so socks, neck gaiters, ice sleeves and wristbands can all be produced on one machine, meeting diversified market demands.

    • Print Head 2 × I1600 Epson
    • Output 20–30 pairs/hr Single-roller cycle
    • Resolution 720×600 Spiral DPI
    • Rollers 70–220 mm Customizable length
    Technical parameters

    CO70-220PRO Specifications

    Factory reference parameters for the single-roller multifunction sock printer. Printing length and roller length are customizable — final values are subject to the ordered configuration and manufacturer confirmation.

    Model No. CO70-220PRO Print Head EPSON I1600, 2 heads
    Print Mode Spiral printing Print Resolution 720×600 DPI
    Media Length 750 mm or customized Production Output 20–30 pairs/hour
    Roller Size 70–220 mm in diameter Roller Length 750 mm or customized
    Media Type Poly / Cotton / Wool / Nylon RIP Software Neostampa
    Ink Type Disperse, Acid, Reactive Ink Color 4 / 8 colors
    Interface Ethernet port Voltage AC 220V, 50~60 Hz
    Machine Dimensions 2200 × 650 × 1350 mm Package Dimensions 2350 × 750 × 1630 mm
    Printing Height 5–10 mm Operating Conditions 20–30 °C; Humidity: 40%–65%
    Suitable Products Socks, neck gaiters, ice sleeves and wristbands
    Technology upgraded

    CO70-220PRO Product Features

    Seven capabilities that make the single-roller platform the flexible, multi-category, small-batch solution for startups and sock shops.

    Open Single-Arm Structure

    The cantilever single-roller design offers generous space for loading and sleeving, making style changeovers and setup quick and easy.

    20–30 Pairs per Hour

    Spiral printing with rotating single-roller design keeps the investment cost low while delivering up to about 30 pairs per hour for flexible production.

    High-Quality Printing Results

    Two EPSON 1600 print heads at 720×600 DPI deliver fine patterns and vivid colors while maintaining the durability of the print.

    70–220 mm Wide Diameter Range

    Roller diameters of 70–220 mm accommodate tubular products as slim as socks and as wide as neck gaiters and ice sleeves.

    One Machine, Multiple Uses

    Socks, neck gaiters, ice sleeves and wristbands share one platform, with polyester, cotton, wool and nylon supported by disperse, acid and reactive inks.

    Simple Operation & Professional Software

    Neostampa RIP software is included as standard with a stable Ethernet connection, and laser positioning makes setup convenient even for new operators.

    Machine structure and core systems

    Inside the CO70-220PRO: Structure & Core Systems

    From laser positioning to the aluminum alloy roller, every system is built for stable, precise day-to-day spiral printing.

    Two adjustable laser units

    Laser Positioning System

    Each sock printer is equipped with two laser positioning units. Users can adjust and position them according to their specific needs, making setup more convenient and faster.

    • Self-adjustable alignment: Position each laser unit to match the product length being printed.
    • Faster changeovers: Manual positioning needs no software parameter changes.
    Two adjustable laser positioning units on the CO70-220PRO printer
    Dual Epson I1600 print heads

    Print Head Carriage

    The print carriage of the sock printer is equipped with two Epson I1600 print heads. Anti-collision devices are installed on both sides of the carriage to provide enhanced protection for the print-head assembly in the event of operational errors.

    • Piezoelectric precision: Epson technology delivers finer, more precise ink droplets.
    • Collision protection: Side-mounted anti-collision devices safeguard the head assembly.
    CO70-220PRO print head carriage with two Epson I1600 heads and anti-collision devices
    Whole-roller lift without parameters

    Lead Screw Lifting

    A lead-screw lifting mechanism is used to adjust the roller on the sock printer. This structure raises or lowers the roller position as a whole, eliminating the need for parameter adjustments in the software — making operation more convenient and intuitive.

    • Uniform mechanical lift: The roller moves as a whole — no software parameters to remember.
    • Head-strike protection: Correct spacing keeps the roller clear of the print heads.
    Lead screw lifting mechanism adjusting the roller on the CO70-220PRO printer
    High-precision linear motion

    Industrial Square Rail

    The beam of the sock printer uses industrial-grade square guide rails, ensuring greater stability of the print-head carriage during reciprocating motion and delivering higher printing precision.

    • Higher printing accuracy: Stable linear travel keeps droplet placement repeatable across the full print length.
    • Sharp patterns without misalignment: Consistent guidance avoids the drift that blurs edges on long runs.
    Industrial-grade square guide rail on the CO70-220PRO carriage beam
    Lower runout than carbon fiber

    Aluminum Alloy Roller

    The rollers of the sock printer are made of aluminum alloy. Compared with carbon fiber, aluminum alloy rollers exhibit lower runout during operation, effectively enhancing printing precision.

    • Stable rotation: Lower runout keeps the printed pattern even around the full circumference.
    • Available in 70–220 mm: Swap cylinder sizes to match each product category.
    Aluminum alloy roller of the CO70-220PRO printer with lower runout
    Watch It In Action

    See the CO70-220PRO Single-Roller Printer at Work

    A quick look at how the single-arm spiral printer loads, rotates and prints on tubular textile in real time.

    Scope of application

    What Can the CO70-220PRO Print?

    Socks, neck gaiters, ice sleeves and wristbands — seamless tubular products in polyester, cotton, wool and nylon, for factories, startups and custom gift suppliers.

    Custom full-color 360-degree printed socks

    Poly · Cotton · Wool · Nylon

    Custom Printed Socks

    Full-color printing on socks of various designs and styles — no-show, ankle, crew and sports — for personalized and promotional orders.

    Custom printed tubular headwear and neck gaiters

    70–220 mm roller range

    Custom Neck Gaiters

    Outdoor sports gaiters, windproof face covers and multifunctional tubular bandanas printed with the wider cylinders in one continuous artwork.

    Custom printed cooling arm sleeves with full-coverage artwork

    Tubular knit extension

    Cooling Arm Sleeves

    UV-protection ice sleeves and sports arm sleeves with seamless all-over graphics, plus wristbands for sports and promotion.

    Explore All Socks Printer Applications
    Buyer guidance & configuration support

    CO70-220PRO Questions, Answered

    Common questions about products, materials, rollers and pricing — then send your requirements for a configuration recommendation.

    The CO70-220PRO is designed for compatible socks and tubular knitwear. Its catalog-listed applications include socks, neck gaiters, ice sleeves and wristbands. With the appropriate cylinder size, other compatible tubular knit products — such as headwear, underwear and yoga leggings — can also be produced, subject to configuration confirmation.

    It can print around the full circumference through coordinated roller rotation and carriage movement. A visually continuous seam still requires repeat-ready artwork with matching opposite edges, the correct output width, stable loading tension and a calibrated starting position. Non-repeating artwork may show a mismatch even after a complete 360-degree print, so please submit the file for review before sample production.

    Polyester, cotton, wool and nylon, with disperse, reactive or acid ink routes. These are not interchangeable choices. Polyester normally uses a compatible disperse/sublimation route followed by heat fixation, while natural fibers and nylon require material-specific pretreatment and finishing.

    The catalog reference is 20–30 pairs per hour (typically up to about 30 pairs per hour). Actual output depends on product size, print length, resolution or Pass setting, artwork coverage, color configuration, loading and unloading time, maintenance condition and the accepted quality standard.

    Standard CMYK textile printing requires a compatible white or light sock blank, because CMYK ink does not create an opaque white underbase over black fabric.

    Consider the finished-product diameter, maximum printable length, extensibility, knitted structure and feeding direction. Roller diameters range from 70 to 220 mm; the standard roller length is 750 mm and can be customized (common configurations span roughly 70–80 cm). The final roller specifications must be determined based on the specific product and equipment configuration.

    Please provide the product type, fiber composition, finished dimensions, construction details, colored heel or toe areas, artwork file, print coverage, target colors and expected order volume.

    The quotation depends on the confirmed print-head and color setup, roller sizes and quantities, ink route, finishing equipment, software license, spare-parts scope, training, packing, shipping and destination requirements.

    No, the printer does not include a computer. A separate computer is required to operate the printer and run the Neostampa RIP software. The printer connects to the computer via an Ethernet port. A standard Windows PC with a stable network connection is sufficient — no high-end specifications are needed.

    Depending on the sock material, you may need the following after-treatment equipment:

    • Industrial steamer — for cotton socks; steam fixes the reactive ink. Capacity approx. 45 pairs at one time.
    • Rotary socks oven — for polyester socks; heat fixes the sublimation ink. One oven can serve 4–5 socks printing machines.
    • Industrial washing machine — to wash off unfixed ink after printing.
    • Industrial dryer / dehydrator — to dry socks after washing.

    For polyester socks, a rotary oven is enough. For cotton socks, a steamer, washing machine and dryer are all required.

    Further reading

    Related guides